Oki C712dn-b User Guide

Maintenance > 58
6. Lift the right-hand end of the toner cartridge (1) and then draw the cartridge to the
right to release the left-hand end as shown (2), and withdraw the toner cartridge out
of the image drum cartridge. Place the cartridge on a piece of paper to avoid
marking your furniture.
7. Take the new image drum cartridge out of its packaging and place it on the piece of
paper where the old cartridge was placed. Keep it the same way round as the old
unit. Pack the old cartridge inside the packaging material for disposal.
8. Place the toner cartridge onto the new image drum cartridge as shown. Push the left
end in first, and then lower the right end in. (It is not necessary to fit a new toner
cartridge at this time unless the remaining toner level is very low.)
9. Push the coloured release lever away from you to lock the toner cartridge onto the
new image drum unit and release toner into it.
NOTE
Follow instructions that come with the new image drum for additional
information such as the removal of packaging material, etc.
2
1
2
1

Oki C712dn-b Specifications

General

Brand	Oki
Model	C712dn-b
Category	Printer
Language	English