Oki C831n - Page 103

- 103 -
Network Setting Items
5
5. Network Settings
Shaded text indicates the factory default setting.
Item
Setting Description
TELNET
Web
browser
Conguration
Tool
(Network
Setting Plug-in)
Network
Card Setup
(Windows)
Network
Card
Setup
(Mac)
Domain
Name
Domain Name - - - (NULL) Set the name of the
domain to which the
printer belongs.
WINS
Server
(Pri.)
WINS Server
(Primary)
- - - 0.0.0.0 Specify the IP address
or name of name server
(a server that translates
computer names into
IP addresses) when an
name sever is used in a
Windows environment.
WINS
Server
(Sec.)
WINS Server
(Secondary)
- - - 0.0.0.0 Specify the IP address
or name of name server
(a server that translates
computer names into
IP addresses) when an
name sever is used in a
Windows environment.
Scope ID Scope ID - - - (NULL) Specify the scope ID for
WINS. From 1 to 223
alphanumeric characters
can be used.
Windows Windows - - - ENABLE Set whether to use the
auto-detection function
for Windows.
DISABLE
Macintosh Macintosh - - - ENABLE Set whether to use the
auto-detection function
for Macintosh.
DISABLE
Printer
Name
Printer Name - - - [OKI] + [-] +
[printer name]
+ [-] + [last six
digits of MAC
address]
Specify the rule of
displaying the printer
name when the auto-
detection function is
enabled.
IP Version IPv6 - - - ENABLE Set whether to use IPv6.
DISABLE
([IPv4 Only],
[IPv4+v6], and
[IPv6 Only] for
TELNET )
WSD Print WSD Print - - - ENABLE Set whether to use WSD
Print.
DISABLE
LLTD LLTD - - - ENABLE Set whether to use LLTD.
DISABLE
 SNMP
Shaded text indicates the factory default setting.
Item
Setting Description
TELNET
Web
browser
Conguration
Tool
(Network
Setting Plug-in)
Network
Card Setup
(Windows)
Network
Card
Setup
(Mac)
Contact to
Admin
Contact to
Admin
- - - (NULL) Enter the contact
information of the system
administrator. Up to 255
one-byte characters can
be entered.