Oki C831n - Windows Utilities; Configuration Tool

- 89 -
Windows Utilities
4
4. Using Utility Software
 Windows Utilities
This section explains utilities you can use in Windows.
Conguration Tool
In the Conguration Tool, you can manage
multiple units and change settings.
The Conguration Tool functions are as follows.
● Display device information
● Registering and managing an ICC prole
● Registering and deleting form data
● Managing stored jobs
● Network settings
To use the Conguration Tool in Windows 2000,
you need to have the following installed.
● Service Pack 4
● Internet Explorer 5.5 SP1 or a higher version
● KB891861 (http://support.microsoft.
com/?kbid=891861)
Setup
Plugins can be installed if necessary.
The following 2 types of plugin are available.
● Network Setting Plugin
● Storage Manager Plugin
Memo
● You can install additional plugins later.
Reference
● For how to install Conguration Tool, please refer to
“Installing Utilities” P.86.
Registering the Printer
When using the Conguration Tool or introducing
a new printer, register the printer in the
Conguration Tool.
1 Select [Start], [All Programs]>
[Okidata]>[Conguration Tool]>
[Conguration Tool].
2 Select [Register Device] from the
[Tools] menu.
Search results are displayed.
3 Select the printer and click on
[Register].
4 On the conrmation screen, click on
[Yes].
Removing a Printer
You can remove a registered printer.
1 Right-click on the printer from
[Registered device Table].
2 Select [Remove device].
3 On the conrmation screen, click on
[Yes].
Checking the Status of the Printer
You can check the status and information of the
printer.
1 Select the printer from the [Registered
Device Table].
2 Select the [Device Info] tab.
Memo
● When the printer is connected to the network,
[Device Status] will be displayed.
● If you want to update information, click on [Update
Device Information].