2
2-9 Installing Fiery software and fonts
Configuring a connection for Fiery Downloader
When you start Fiery Downloader, you must specify the connection to the C9800.
BEFORE YOU BEGIN
• Print the Configuration page from the Printer Control Panel and note the AppleTalk
zone of the C9800. See page 2-4.
TO SPECIFY A C9800 CONNECTION
1. Double-click the Fiery Downloader icon.
2. Select the AppleTalk zone in which the C9800 is located from the AppleTalk Zones list.
The available servers appear in the Servers list.
3. Select the C9800 in the Servers list.
Fiery name and device name
(C9800)
To Next Page
Loading...
