Oki C9800hdn Software Installation Guide

2
2-17 Installing color files from CD2
Loading the ICC printer profile
The ICC printer profile enables RGB-to-CMYK conversions that are specific to the
kind of printer you are using.
TO LOAD THE ICC PRINTER PROFILE IN PHOTOSHOP 5.X
1. Start Photoshop.
2. Choose Color Settings from the File menu and choose CMYK Setup from the Color
Settings submenu.
3. In the CMYK Setup dialog box, choose ICC as the CMYK color model.
4. Select the profile that corresponds to the Fiery from the Profile menu.
5. Click OK.
For more information about ICC profiles, see your Photoshop documentation.
Loading monitor settings and the ICC device profile in Photoshop 6.x/7.x
In Photoshop 6.x and 7.x, you can load the monitor settings file and the ICC device
profile at the same time.
TO LOAD THE MONITOR SETTINGS FILE AND THE ICC DEVICE PROFILE IN
P
HOTOSHOP 6.X/7.X
1. Start Photoshop.
2. Choose Color Settings from the Edit menu and then choose Advanced Mode.
3. Choose EFI RGB from the RGB menu.
4. Choose the profile that corresponds to the Fiery from the CMYK menu.
5. Click OK.
For more information, see your Photoshop documentation.

Oki C9800hdn Specifications

Performance

print speed color	36 ppm
print speed mono	40 ppm
time to first page color	10.5 sec
time to first page mono	9 sec
warm-up time	110 sec
resolution	1200 x 1200 dpi
processor	1 GHz
duty cycle	150, 000 pages/month

Memory

standard ram	1, 024 MB
flash memory	4 MB
hard disk drive	20 GB

Paper Handling

standard input	760 sheets
optional input	2nd/3rd universal tray (530 sheets each)
maximum capacity	2, 880 sheets
paper sizes supported	up to 12.9" by 47.24"
paper weight trays 1-5	17 lb.–57.5 lb. bond
duplex printing	standard on C9800hdn

Power and Acoustic Noise

power consumption typical	750W
power consumption peak	1500W
power consumption idle	200W
acoustic noise operating	54dB(A)

Weight and Dimensions

size	25.8" x 24.4" x 18.2"
weight	152 lb.