What to do if Oki All in One Printer displays 'File server name not found. Try again?'?
This message appears when the Oki All in One Printer cannot find a file server with the specified name on the network. Check the name of the NetWare file server, verify cable connections, and ensure the NetWare server is powered on.
What to do if my Oki All in One Printer says 'All connections used. Remove server?'?
This message indicates that you have reached the maximum limit of eight bindery servers. To add another server, you will need to disconnect one of the existing ones.
Why does my Oki All in One Printer say 'Warning! Selecting a new NDS tree deletes Bindery setup.'?
This warning appears because the Oki All in One Printer was previously connected to a different NDS tree. To prevent deleting the bindery settings, select OK and then choose No when the message 'Delete Bindery setup and continue?' appears.
What to do if my Oki All in One Printer displays 'No NetWare file server found.'?
Check the cable connections and ensure that the NetWare server is turned on.
How to fix 'Novell error code' on Oki All in One Printer?
This message indicates that Novell NetWare has reported an error. If troubleshooting the network yourself is not possible, you should notify the Novell administrator to troubleshoot the network.
What to do if my Oki All in One Printer displays 'No NetWare print server found.'?
You must configure a print server and a print queue for every NetWare file server that will handle Oki All in One Printer print jobs.
How to resolve 'Error. Cannot open bindery connection to NDS server' on Oki All in One Printer?
Select this server through NDS setup or disable NDS and select it through bindery.
What does 'Warning! IPX network number is zero' mean on Oki All in One Printer?
This warning indicates that no other IPX machine can be found on the network, or the network hub is not connected to the network when the Fiery tries to bind.
What does 'Invalid frame size' mean for Oki All in One Printer?
This issue occurs when the network hub is not connected to a Novell machine when the Fiery tries to bind.
Why does my Oki All in One Printer say 'No NDS trees found.'?
Check to see that the frame types on the Fiery are properly configured.
General| Print Technology | LED |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Connectivity | USB, Ethernet |
| Operating Systems Supported | Windows, Mac, Linux |
| Duplex Printing | Yes |
| Printer Type | Color Printer |
To Next Page
