Configuring the MFP > 8
5. Using the soft keyboard (or USB keyboard if you have this available), log into
SendMe.
The SendMe Local Database Administrator screen is displayed.
6. Enter the required information and settings to the 3 main tabs:
(a) Users; from here you can add, delete and duplicate user information.
(b) Application Settings; the left hand panel provides access to a number of
settings including email, authentication and stamping options which you can
customise to suit your needs.
(c) Synchronisation; if you have multiple machines, you can setup a centralised
database.
7. When complete, press Database > Save to save the settings.
8. Press Database > Exit to log out and return to the Administrator Setup screen.
NOTE
Default password is “sendme” (all lower case).
To Next Page
Loading...
