Configuring the MFP > 9
F
AX
C
HANGING
THE
COUNTRY
CODE
If you need to change the country code:
1. Press the Setup button (1) on the scanner control panel.
2. Using the numerical keypad (2), type in 1 -> 9 -> 3 -> 7 -> 1 to access the fax
maintenance screen.
3. At the confirmation prompt, press Yes.
NOTE
If you execute “Factory Default” from the Admin Setup menu, the country
code setting will return to the default (USA).
21
SCAN
TO NET WORK
TO MAI LBOX
TO HOL D QUEUE
SEND ME
FAX
To Next Page
Loading...
