- 41 -
Installing the Device
AppendixPrinting
3
Setting Up
2
Before use
1
Basic Device Operations
4
Index
4
Align the (red) arrow labels on the
image drum with the arrows on the
device, and gently insert into the slot
and push in rmly all the way while
being careful not to touch the green
cylinder with your hands.
Note
Be careful not to touch or scratch the image drum
(green cylinder).
5
Close the front cover.
Reference
Model C941/ES9541/Pro9541 requires the Spot Color kit to be
set. For details, see the "Separate Volume Spot Color Guide".
Set the transfer roller unit.
1
Lift the exit unit opener ( ), and pull
out the exit unit.
2
Raise the lock levers (blue) at both ends
of the transfer roller unit installation
location of the exit unit.
To Next Page
Loading...
Need help?
General
