Oki DP Series User Manual

- 62 -
Connecting the PC
AppendixPrinting
3
Setting Up
2
Before use
1
Basic Device Operations
4
Index

Setting the IP Address in the PC
Note

If the IP address has already been set in the PC or is
acquired automatically, go to “Setting the IP Address in
the Device Using the Control Panel” (P.59).
1
Turn ON the PC power supply to start
Windows.
2
Click [Start], and select [Control panel].
3
Click [View network status and tasks].
4
Click [Local Area Connection], and then
click [Properties] in the "Local Area
Connection Status" window.
5
Select [Internet Protocol Version 4 (TCP/
IPv4)], and click [Properties].
6
Enter the IP address, Subnet mask,
Default gateway, and DNS server, and
click [OK].
Memo

If acquiring the IP address from the DHCP server
automatically, select "Obtain an IP address
automatically", and do not enter an IP address.

Do not enter if not using a Default gateway or DNS
server.
7
Close the "Local Area Connection
Properties" window.

Oki DP Series Specifications

General

Brand	Oki
Model	DP Series
Category	Printer
Language	English