21 • Getting Started
• Oki Driver Installer Program (recommended method)
• Plug and Play (USB only)
Oki Driver Installer Installation
Before powering up the printer
1. Run the Oki driver installer program from the CD-ROM supplied with your unit.
2. Plug in the printer and switch it on.
Windows completes the installation of the TWAIN and printer drivers automatically.
Plug and Play Installation
When the MFP is plugged into a PC using a USB cable, you'll be prompted to install
two different drivers; the TWAIN (scanner) driver first and then the printer driver.
1. Attach the printer to a USB port on your computer.
2. Switch on the Printer.
3. Insert the Drivers & Utilities CD supplied with you unit.
The ‘New Hardware Found' screen displays.
If you do not see the ‘New Hardware Found' screen, please check that the power
and USB cables are connected properly, and the printer is switched on.
Note7
If the CD runs automatically, cancel the dialog box.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
