TROUBLESHOOTING FOR PRINTING
- 22 -
● TROUBLESHOOTING FOR PRINTING
Print Job Problems
This section describes how to clear the print jobs errors.
Clearing print job errors
Problem Description
A print job error occurs and [JOB STATUS] blinks when the paper specified by the computer is not set in the trays of the equipment.
Corrective Action
Clear the error following the procedure below.
To print by placing paper on the multi-purpose tray (MPT)
1
Press the [JOB STATUS] which is blinking.
2
Place paper of the size specified with the computer on the multi-purpose tray (MPT), and press
the [START] button.
Printing is performed. Press [JOB STATUS] when printing has been completed.
Printing by selecting a paper size already placed in another tray
You can perform printing with the paper already placed in the trays. Some part of the image may not be printed, however, if the paper
size in the tray is smaller than the one you have specified.
Press the tray button you intend to use on the touch panel and press the [START] button.
To Next Page
Loading...
Need help?
General
