Oki MB770 - Page 41

HOW TO MAKE COPIES
- 41 -
1
2
3
4
5
6
4
Press [CUSTOM PAPER] on the touch
panel.
5
Key in the dimension.
1) Press [Length] and key in the value. (127mm to
356mm)
2) Press [Width] and key in the value. (64mm to 216mm)
3) Press [OK].
Length and width are indicated as shown on the right:
To call up the dimension data registered previously, press
the desired button from [MEMORY 1] to [MEMORY 4],
and then press [OK].
Memo
• To register dimension data into the memory, see the
following page:
 P.41 "Registering non-standard size in the memory"
6
Select other copy modes as required, and
then press the [START] button on the
control panel.
 Registering non-standard size in the
memory
1
Follow the same procedure noted in steps 1
to 6 in "Bypass copying on non-standard
size paper" ( P.4 0 ) .
2
Register dimensions.
1) Select a desired memory number.
2) Press [Length] and key in the value. (127mm to
356mm)
3) Press [Width] and key in the value. (64mm to 216mm)
4) Press [MEMORY].