Appendix A - menu system > 187
Management
(cont.)
System Setup
(cont.)
Unit Of Measure Millimeter Select unit of
measure.
Date Format dd/mm/yyyy Select desired date
format.
Allow All Reports To Print Disable Enable/disable report
printing.
Near Life LED Enable Enable/disable near
life LED.
Near Life Status Enable Enable: Display a
near-life warning.
Disable: Do not display a
near-life warning.
Address Information
Lock Time Out
3 minute(s) Enter time-out
duration.
USB Memory Interface Enable Select disable to turn
off scan to USB
function.
Panel Contrast 0 Adjust the LCD panel
contrast.
Power Save Power Save Time 1 minute Select desired time
interval before
machine enters power
save mode.
Sleep Time 30 minutes Select desired time
interval before machine
enters sleep mode.
Auto Power Off Time 4 hours Select desired time
interval to turn off the
machine's power
automatically.
Silent Mode ON Enable/disable silent
mode.
ECO Mode ON When ON, if the
machine is in power
save mode and you
send a small print job
(1 or 2 pages), the
machine will print the
job without warming
the fuser to the
“normal” operating
temperature
beforehand.
Memory Setup Receive Buffer Size Auto Specify the size of the
buffer you want to use
to receive data.
Resource Save OFF Specify the size of the
buffer you want to use
for resource saving.
Flash Memory
Setup
Initialize Execute
SD Memory
Card Setup
Initialize Execute
Format Partition PCL
Common
PS
ITEM OPTION DEFAULT VALUE/DESCRIPTION
To Next Page
Loading...
Need help?
General
