Appendix A - menu system > 188
Management
(cont.)
Storage
Maintenance
Setup
Check File System Execute Making changes will
automatically restart
the system.
Erase SD Memory Card Execute Deletion of all data
stored in the SD Card.
Data cannot be
recovered.
Initial Lock Enable Enable/disable initial
lock.
Encryption
Setup
Job Limitation Disable Enable/disable
limitation setting.
Language Maint
Setup
Initialize Execute Making changes will
automatically restart
the system.
Admin Password New Password user defined Enter new password.
Retype your password
when prompted to
verify.
Note: password must
be six characters or
more.
Enter Password (Verify) user defined
Reset Settings Execute Continuing will
automatically restart
the system.
Job Log Setup Save Job Log Disable
Clear Job Log Execute
Print Statistics Supplies Report Disable Indication of
frequency of
consumable
exchange/non
indication is set.
Reset Main Counter Execute Zeros the counter.
Reset Supplies Counter Execute
User Install Time Zone 00:00 Range: -12:00 to
+12:00 minutes in 15
minute increments.
Set Daylight Saving ON Enable/disable
daylight saving
setting.
Time Setup Auto Setup
SNTP Server
(Primary):
SNTP Server
(Secondary):
user defined
user defined
Set todays date and
time automatically.
Manual
Date:
Time:
user defined
user defined
Enter todays date and
time using the
keypad. Use the arrow
keys to move between
digits.
Power Save Power Save Enable ON Enable/disable power
save mode.
ITEM OPTION DEFAULT VALUE/DESCRIPTION
To Next Page
Loading...
Need help?
General
