General Description
This section describes the features and specifications of the printers.
Assigned Tasks
Read Section 1 of the Service Handbook.
Read Appendix A in the Printer Handbook.
Installation
In this section, you will install the unit. You will also perform various tests.
Assigned Tasks
Review the Printer Handbook
Read the Introduction; Chapters 1, 2, 3, 4, and 5; and Appendices B, C, D, E, and F
in the Printer Handbook.
If a product is available, perform the tests listed below. Refer to Section 4 of the
Service Handbook.
Rolling ASCII
Font Test
Principles of Operation
This section describes the function of the major assemblies from an electrical and mechanical
perspective.
Assigned Tasks
Read Section 2 of the Service Handbook.
Course Administration i - 8 Microline 520/521 Service Handbook
P/N 59257803
To Next Page
Loading...
