2.1.05 Space and Line Feed (SP/LF) Motor Control
The LSI (Location 04B: MSM79V035) generates the space motor and the line feed motor
control signals according to commands received from the MPU. These signals are sent to the
SP/LF motor driver.
Line Feed Motor Control
The SP/LF motor driver (Location 5A: MHM2025) drives the line feed motor in two-phase
bipolar, based on the phase changeover data output from the LSI.
The serial data from the LSI (04B: MSM79V035) is processed by a register contained in the
SP/LF motor driver to measure the overdrive time and to change the phase.
2-1-05a.tif
2-1-05d.tif
Principles of Operation 2 - 10 Microline 520/521 Service Handbook
P/N 59257803
To Next Page
Loading...
