Maintenance
Disassembly / Assembly
Assigned Tasks
Read Section 3.2 of the Service Handbook.
View the videotape.
CAUTION:
Okidata does not recommend performing the disassembly / assembly procedures on a
product which is operating normally. Therefore, you are not required to perform the
disassembly / assembly procedures to complete this training.
Adjustments and Service Checks
This section explains the adjustments performed after parts replacement. Hardware replacement
may require adjustments to firmware settings. This section also explains viewing and resetting
counters.
Assigned Tasks
Read Section 3.3 of the Service Handbook.
Perform the procedures listed in Section 3.3 of the Service Handbook.
Cleaning
Assigned Tasks
Read Section 3.4 of the Service Handbook.
Lubrication
Assigned Tasks
Read Section 3.5 of the Service Handbook.
Shipping Instructions
Assigned Tasks
Read Section 3.6 of the Service Handbook.
Course Administration i - 10 Microline 520/521 Service Handbook
P/N 59257803
To Next Page
Loading...
