8. According to the Printer Handbook or Section Three of this Service Handbook, which of
the following settings is NOT a default menu setting of the serial interface
configuration?
A. Parity - Even
B. Serial Data - 8 bits
C. Protocol - Ready/Busy
D. Baud Rate - 9600 bps
Correct Answer: A
Page 90, Printer Manual User’s Documentation, Rev 01 and 02
Page 3-81, Service Handbook, Rev 03
9. The ALARM lamp is flashing. The PROP and 10 cpi lamps are lit. Which alarm is the
printer experiencing?
A. Printhead Data Transfer Alarm
B. Printhead Type Alarm
C. Paper End Alarm
D. Space Motor Alarm
Correct Answer: B
Page 4-29 and 4-30, Service Handbook, Rev 01 and 02
Pages 4-19 and 4-20, Service Handbook, Rev 03
Microline 520/521 Service Handbook i - 19 Course Administration
P/N 59257803
To Next Page
Loading...
