Microline 8480FB User’s Guide
Loading Print Media • 21
2. Lift the lock lever on the left tractor, then move the left tractor to
set the desired left margin for printing.
•The ▼ mark on the gauge (1)—or the center of the diamond
shaped hole (2)—represents the location of the center of the
first character printed.
• For printing forms, move the left tractor to the right as far as
it will go (the movement of the left tractor is limited to ensure
that the paper covers the paper out sensor).
3. Push the lock lever down to lock the left tractor in place.
To Next Page
Loading...
