Oki Microline 8480 FB - Buzzer, Character Set, and Code Page Settings

Microline 8480FB User’s Guide
Explanation of Function Setting Menu Items • 44
Auto LF
The default is No. If you want the printer to automatically add a
line fee
Buzzer
The default is Enable. Change to Disable to turn off the printer’s
audible alarm.
Buzzer Volume
Choose the volume of the buzzer: Low [the default], Middle, or
High.
Character Set
Choose the Character Set: Set I [the default] or Set II.
Check Print Area
Applies to manual feed from the platform with Auto Alignment
enabled. Determines whether or not data which is outside the
normal print area specified for the page prints.
The default is Valid: data overflow does not print. This prevents
such data from printing on the platen.
Caution! If you change this setting to Invalid, data could
print directly on the platen and damage the printhead.
Code Page
Choose the Code Page character set you wish to use: USA [the
default], Canada French, Multilingual, Portugal, Norway, BRASCII,
Abicomp, Multilingual 1858, or ISO-8859=15.
CutSheet Smooth
Helps to correct for paper curl when feeding in a form manually
through the platform. Available settings: Valid [the default] or
Invalid.
Eject Dir.
Choose where the paper is ejected when you are using manual
feed from the platform: Front [the default] or Rear.