Oki Microline 8480 FB - Setting the Top of Form (TOF); Setting TOF Using the Printer Menu

Microline 8480FB User’s Guide
Setting the Top of Form (TOF) • 55
Setting the Top of Form (TOF)
The default top of form is set in the printer menu.
The factory default for TOF is 1/4-inch (6.4 mm), equivalent to the
distance down from the top of the sheet to the horizontal midpoint of
the first line of printed characters.
You can establish one custom TOF setting for each feed path (Manual
and Front) and store it in the printer’s memory as 1Chr Set Pos. This
selection will then automatically appear as the setting for TOF for the
corresponding group in the Function Setting Menu.
You can also use the control panel switches to set a temporary TOF
for one sheet or one continuous form.
Setting TOF Using the Printer Menu
Note The printer default for TOF is 1/4-inch (6.4 mm).
1. Press SEL.
The printer goes off-line.
2. Simultaneously press SHIFT and MODE.
The printer enters the Function Setting Menu. PRINTER CONTROL
displays.