Oki Microline 8480 FB - Explanation of Function Setting Menu Items; First Dot Adjustment (Align)

Microline 8480FB User’s Guide
Explanation of Function Setting Menu Items • 41
Explanation of Function Setting
Menu Items
The menu items are listed in alphabetical order.
For a summary of the menu groups, items and settings, see page 35.
1stDotAdjAlign
Note Auto Alignment (see page 42) must be enabled.
Adjusts the set horizontal location for printing the first character
on a form when using manual feed from the platform. Selectable
settings: Left 10, Left 9, … Left 2, Left 1, Right 1, Right 2 … Right
9, Right 10, in increments of 1/180 inch (0.14 mm).
The default is 0.
1stDotAdjCut
Note Auto Alignment (see page 42) must be disabled.
Adjusts the set horizontal location for printing the first character
on a form when using manual feed from the platform. Selectable
settings: Left 10, Left 9, … Left 2, Left 1, Right 1, Right 2 … Right
9, Right 10, in increments of 1/180 inch (0.14 mm).
The default is 0.
1stDotAdjFront
Adjusts the set horizontal location for printing the first character
on a form when using continuous forms (front feed). Selectable
settings: Left 10, Left 9, … Left 2, Left 1, Right 1, Right 2 … Right
9, Right 10, in increments of 1/180 inch (0.14 mm).
The default is 0.