Oki Microline 8480 FB - Adjustment and Registration Settings

Microline 8480FB User’s Guide
The Function Setting Menu • 40
Adjustment TOF Adj. (Cut) -40 to 0 to +40
in increments of 1/120 inch
TOF Adj.(CSFF) Not Used.
TOF Adj.(CSFR) Not Used.
Front Load Adj. -40 to
0 to +40
in increments of 1/120 inch
PE Adj. (Cut) -15 to 0 to +15
in increments of 1/120 inch
PE Adj. (CSFF) Not Used.
PE Adj. (CSFR) Not Used.
PE Adj. (Front) -15 to
0 to +15
in increments of 1/120 inch
PE Adj. (Rear) Not Used.
1stDotAdjCut Left x,
0 , Right y
x = 10 through 1
y = 1 through 10
adjustable in increments of
1/180 inch (0.14 mm)
1stDotAdjAlign Same as above
1stDotAdjCSFF Not Used.
1stDotAdjCSFR Not Used.
1stDotAdjFront Same as above
1srDotAdjRear Not Used.
Adjustment (cont.) Regist. Low -5 through +5,
adjustable in increments of
1/360 inch (0.14 mm)
Regist. Normal Same as above
Regist. High 1 Same as above
Regist. High 2 Same as above
LF Revise (Cut) -10 to
0 to +10
See table below.
LF Revise (CSFF) Not Used.
LF Revise (CSFR) Not Used.
Group Item Settings