Microline 8480FB User’s Guide
Troubleshooting • 74
Error Messages
Manual paper End
Insert Paper
Load paper on the platform and press SEL.
Paper end alignx
insert paper
Load paper on the platform and press SEL.
Front Paper End
Insert Paper
Load continuous forms paper on the tractors.
Paper Jam
Remove paper
Remove the jammed paper (see page 69) and press SEL.
Data Present
Insert Paper
The printer has received data, but there is no print media loaded in
the selected path. Load print media.
Data Present
Press SEL Sw
The printer has received data and paper is loaded, but the printer is
off line. Press the SEL switch to place the printer on line.
Path Changing
Remove Cut Sheet
The printer is attempting to change paper paths from Manual Feed to
Front Feed, but print media is loaded on the platform. Remove the
media from the platform.
Cover Open
Close Cover
Close the top cover.
Paper Feed Alarm
Re-Set Paper
Print media on the platform has miss-fed into the printer. Press SEL,
then press LOAD to eject the media, then try loading it again.
To Next Page
Loading...
