Microline 8480FB User’s Guide
Explanation of Function Setting Menu Items • 54
•paper moves up.
Wait Time
Note Auto Alignment (see page 42) must be disabled to use
Wait Time.
Choose the amount of time the printer waits for paper to be
inserted after print data is received when you are using manual
feed from the platform: 2.0 sec [the default], 1.5 sec, 1.0 sec, or
0.5 sec.
Zero Character
The default is Unslashed. Change to Slashed if you wish to use a
slash to distinguish the number zero from the capital letter 0.
To Next Page
Loading...
