Microline 8480FB User’s Guide
The Function Setting Menu • 33
Printing the Function Setting Menu using
Continuous Forms (Front Feed)
Before Starting:
1. Make sure continuous forms are loaded.
2. Make sure front feed is selected. If manual feed is selected, the
second line of the display reads ALIGN1 (the default, or
whatever alignment method you have selected).
To switch from manual feed to continuous forms:
a. Press SEL to place the printer off-line.
b. Press MODE. The display changes to
PATH CHANGE
MANUAL
Press the MODE switch one or two times until FRONT
appears on the second line of the display.
The printer automatically switches to the front path and returns
on line.
To Next Page
Loading...
