Microline 8480FB User’s Guide
Running Tests • 63
Engaging the Hex Dump Mode
1. Be sure paper is loaded.
2. Turn the printer off.
3. Simultaneously press and hold the MODE + LF + SHIFT switches
while turning the printer on, until
RELEASE SW displays.
HEXDUMP NORMAL displays and “Hex Dump Mode” prints at
the top of the paper.
Running a Hex Dump Test
To run the test, send data to the printer while it is in the Hex Dump
Mode.
Exiting Hex Dump Mode
Turn the printer off, then on again.
To Next Page
Loading...
