18 ML3390/91
Group Item Settings
Set-Up Operator Panel Function Full Operation, Limited Operation
(continued) Reset Inhibit No, Yes
Print Suppress Effective Yes, No
Auto LF No, Yes
Auto CR* No, Yes
SI Select Pitch (10 cpi)* 17.1 cpi, 15 cpi
SI Select Pitch (12 cpi)* 20 cpi, 12 cpi
Time Out Print Valid, Invalid
Auto Select No, Yes
Graphics Speed Low, High
Centring Position DEFAULT, MODE1, MODE2**
Parallel I/F I-Prime Buffer Print, Invalid, Buffer Clear
Pin 18 +5V, Open
Auto Feed XT*** Invalid, Valid
*
Appears only when the IBM emulation is selected.
** ML3391 only.
*** Applies only when the Epson emulation is selected.
3390hlp3.pm6 22/03/96, 16:0518
To Next Page
Loading...
