Oki ML3410 - Menu Selections: Rear Feed Parameters

Code Page
USA
, Canada French,
Multilingual,
Portu-gal, Norway
Matches the
character set to the
computer display
character set; see
your DOS manual.
The next three groups
let you set
parameters for each
of the paper paths
independently. When
you change from one
path to another, the
parameters
automatically change,
too.
Rear Feed Line Spacing
6 LPI
, 8 LPI Sets the distance
between lines in lines
per inch.
Form Tear Off
Off
, 500 mS, 1 sec, 2
sec
2 sec Activate the
form tear off feature
(page 16) by select-
ing a time for the
printer to wait after
data before
advancing the page to
tea-roff. If your
software pauses
during printing and
causes the paper to
bounce, select a
longer time or
deactivate the
fea-ture.
Skip Over Perforation
No
, Yes When set to Yes, at
bottom of page skips
1 inch to next top of
form. Use only for
unformatted listings or
programs that dont
format the page.
Page Width
13.6
²,8² The 8² setting
emulates a narrow
carriage printer. If you
always use 8 1 /2²
paper, choose this
setting to prevent
printing on the platen.
Page Length Page Length
11
², 11
2/3²,12²,14², 17²,3²,
3.5²,4², 5.5², 6²,7²,8²,
8.5²
ML3410 ( 96-02-07 )