Oki ML3410 - Menu Selections: Bottom & Top Feed Parameters

Bottom Feed Line Spacing
6 LPI
, 8 LPI Sets the distance
between lines in lines
per inch.
Form Tear Off Form Tear Off
Off
,
500 mS, 1 sec, 2 sec
Activate the form tear
off feature (page 16)
by select-ing a time
for the printer to wait
after data before
advancing the page to
tea-roff. If your
software pauses
during printing and
causes the paper to
bounce, select a
longer time or
deactivate the
fea-ture.
Skip Over Perforation
No
, Yes When set to Yes, at
bottom of page skips
1 inch to next top of
form. Use only for
unformatted listings or
programs that dont
for-mat the page.
Page Width
13.6
²,8² The 8² setting
emulates a narrow
carriage printer. If you
always use 8 1 /2 ²
paper, choose this
setting to prevent
printing on the platen.
Page Length Page Length
11
², 11
2/3²,12²,14², 17²,3²,
3.5²,4², 5.5², 6²,7²,8²,
8.5²
Top Feed Line Spacing
6 LPI
, 8 LPI Sets the distance
between lines in lines
per inch.
Skip Over Perforation
No
, Yes When set to Yes, at
bottom of page skips
1 inch to next top of
form. Use only for
unformatted listings or
programs that dont
for-mat the page.
Page Width
13.6
²,8² The 8² setting
emulates a narrow
carriage printer. If you
always use 8 1 /2 ²
paper, choose this
setting to prevent
printing on the platen.
ML3410 ( 96-02-07 )