Page Length
11
², 11 2/3²,12²,14²,
17²,3², 3.5²,4², 5.5², 6²
,7²,8², 8.5²
Set-Up Graphics
Bi-directional
,
Unidirectional
Bi-directional prints
from left to right, then
right to left; this is
faster, but may cause
registration
prob-lems.
Uni-directional
printing (left to right
only) is more precise,
but slower.
Max. Receive Buffer 1 Line, 4K,
16K
, 28K Specifies amount of
the printers buffer
used to store data.
Paper Out Override No, Yes A sensor stops
printing about 1 inch
from the bot-tom of a
single page.
Changing this setting
to Yes lets you print
closer to the bottom
edge of the paper.
Print Registration 0.25 mm Right, 0.20
mm Right, 0.15 mm
Right, 0.10 mm Right,
0.05 mm Right,
0.00
mm
, 0.05 mm Left,
0.10 mm Left, 0.15
mm Left, 0.20 mm
Left, 0.25 mm Left
This lets you adjust
the vertical
registration in
graphics. The best
setting may vary from
one soft-ware
package to another.
ML3410 ( 96-02-07 )
To Next Page
Loading...
