Vertical Control
Set 1/8 Line
Spacing
ESC 0 27 48 1B 30 1/8> Line
Spacing=8 lines
per inch.
Set 1/6 Line
Spacing
ESC 2 27 50 1B 32 This is standard
typewriter spacing.
Set 7/72 Line
Spacing
ESC 1 27 49 1B 31
Set n/72> Line
Spacing
ESC A n 27 65 n 1B 41 n n=0 to 85 n=0: no
line feed.
Set n/144> Line
Spacing
ESC % 9 n 27 37 57 n 1B 25 39 n n=0 to 255 n=0: no
line feed
Set n/216> Line
Spacing
ESC 3 n 27 51 n 1B 33 n n=0 to 255 n=0: no
line feed
Line Feed LF 10 0A Prints buffer data
and moves the
printhead by the
current line
spacing value.
n/144> Line Feed ESC % 5 n 27 37 53 n 1B 25 35 n Executes a single
n/144> line feed
without changing
line spacing. n=0
to 255 n=0: no line
feed
n/216> Line Feed ESC J n 27 74 n 1B 4A n Executes a single
n/216> line feed
without changing
line spacing. n=0
to 255 n=0: no line
feed
Form Feed FF 12 0C Prints data in
buffer and
advances paper to
next top of form.
Vertical Tab VT 11 0B Print buffer data
and move to next
programmed
vertical tab stop.
Set Vertical Tab
Stops
ESC B n n ... n
NUL
27 66 n n ... n 0 1B 42 n n ... n 00 Sets vertical tab
stops at specified
lines. k=1 to 16:
number of tabs
n=1 to 255: line
number where tab
is to be set
ML3410 ( 96-02-07 )
To Next Page
Loading...
