Set Vertical
Format Unit (VFU)
ESC b n m m ... m
NUL
27 98 m m ... m 0 1B 62 m m ... m
00
Programs up to 8
separate sets
(channels) of
vertical tab stops.
n=0 to 7: channel
number (0 is
default set by ESC
B) k=1 to 16:
number of stops in
channel m=1 to
255: line number
of tab stop
Select Vertical Tab
Channel
ESC / n 27 47 n 1B 2F n Activates
preprogrammed
vertical tab
channel n. VT
moves to stops in
this channel.
Set Form Length
in Inches
ESC C NUL n 27 67 0 n 1B 43 00 n n=1 to 22 inches
This command
cancels Skip over
Perforation setting.
Set Form Length
in Lines
ESC C n 27 67 n 1B 43 n n=1 to 127 lines at
current line
spacing. This
command cancels
Skip over
Perforation setting.
Set Skip Over
Perforation
ESC N n 27 78 n 1B 4E n Activates Skip
Over Perforation
feature and sets it
for n lines at the
current line
spacing. When the
printer reaches the
bottom of the
page, it will skip n
lines to next top of
form. Command
overrides menu.
n=1 to 127
Cancel Skip Over
Perforation
ESC O 27 79 1B 4F Deactivates Skip
Over Perforation.
Command
overrides menu.
Cut Sheet Feeder
(Option)
ML3410 ( 96-02-07 )
To Next Page
Loading...
