Oki ML3410 User Manual

Start
subscriptprinting
ESC D 27 68 1B 44
Cancel
super-script/subs
criptprinting
ESC E 27 69 1B 45 Returns
superscript
orsubscript
printing tonormal
print.
Start
underlineprinting
ESC U 27 85 1B 55 Underlines
characters,but
not spaces
createdby HT
command.
Stop
underlineprinting
ESC V 27 86 1B 56
Incremental
char-acter
spacing
ESC N n 27 78 n 1B 4E n Adds n dot
columnsbetween
charactersuntil
changed
orcancelled (n =
0). Widthof a dot
column
varieswith pitch
and printquality
(utility/NLQ).n =
0 to 11
Graphics
Set single
densitygraphics
ESC P 27 80 1B 50 Graphics
density72(V)
120(H) dpi.
Setsdensity only.
Set double
densitygraphics
ESC R 27 82 1B 52 Graphics
density144(V)
120(H) dpi.Sets
density only.
Set
quasi-doubleden
sity graphics
ESC Q 27 81 1B 51 Doubles each dot
hori-zontally and
verticallywith -dot
overlap.
Enter
graphicsprint
mode
ETX 3 03 All following data
isinterpreted as
graphicinformatio
n except aslisted
below. Once
ETXis received,
it is
ignoredexcept in
the
combina-tions
indicated.
ML3410 ( 96-02-07 )

Oki ML3410 Specifications

Print Specifications

printhead	9 pin
print speed at 10 cpi	HSD 550 cps, Utility 417 cps, NLQ 104 cps
graphics resolution	1445216 dpi maximum

Paper Handling

paper weight	12 to 24 lb
paper thickness top feed	0.36 mm (0.014 inches) maximum
paper thickness bottom feed	0.50 mm (0.020 inches) maximum

Operating Environment

operating temperature	50 to 104 degrees F (10 to 40 degrees C)
storage temperature	14 to 122 degrees F (-10 to +50 degrees C)
humidity	20 to 80% RH

Electrical Requirements

voltage	120 volts, +5.5%/-15% 220/240 volts, ±10%
frequency	50/60 Hz, ±2 Hz
power idling	30 watts
power operating	75 watts

Weight and Dimensions

width	25-1/4 inches (540 mm)
depth	19 inches (483 mm)
height	15 inches (203 mm)
weight	63 lbs. (25.4 kg)