76 Microline 420/421 User’s Guide
Oki MICROLINE Standard
Commands (continued)
Oki Command ASCII Decimal
Line Feed Commands
w/ Carriage Return LF 10
w/o Carriage Return ESC DC2 27 18
n/144" (n = 0 to 127) ESC % 5 n 27 37 53 n
Reverse ESC LF 27 10
Line Spacing
Set Spacing to 1/6" ESC 6 27 54
Set Spacing to 1/8" ESC 8 27 56
Set Spacing, in n/144"
(n = 0 to 127) ESC % 9 n 27 37 57 n
Skip Over Perforation
1/3" increments
(n = 1 to 9) ESC G n n 27 71 n n
Default ESC % S 0 27 37 83 48
Oki Command ASCII Decimal
Paper Out Sensor Off ESC E 1 27 69 49
Paper Out Sensor On ESC E 0 27 69 48
Print Quality
Select HSD/SSD ESC # 0 27 35 48
Select NLQ Courier ESC 1 27 49
Select NLQ Gothic ESC 3 27 51
Select Utility ESC 0 27 48
Print Speed, Set to Full ESC > 27 62
Print Speed, Set to Half ESC < 27 60
Print Suppress On DC3 19
Print Suppress Off DC1 17
Proportional Printing
On ESC Y 27 89
Off ESC Z 27 90
Reset: Clear Print Buffer CAN 24
To Next Page
Loading...
Need help?
General
