Oki MPS4200mb - OKI LPR Utility

Windows Utilities
- 125 -
Useful Software
7
Changing the Password.
1 Launch Network Card Setup.
2 Select your machine from the list.
3 Select [Change Password] from the
[Setting] menu.
4 Enter the current password.
- The default password is the last 6 alphanumerical
digits of the ethernet address.
- The password is case sensitive.
5 Enter the new password, and reenter it
for confirmation.
The password is case sensitive.
6 Click [OK] on the confirmation window.
Change the Environment.
You can configure the machine search condition,
time-out value for each setting, and items to be
displayed on the list.
1 Launch Network Card Setup.
2 Select your machine from the list.
3 Select [Environment Settings] from
the [Option] menu.
4 Set the settings as required and click [ OK ].
OKI LPR Utility
You can perform a print job via network, manage
print jobs, check the machine status by the
utility.
In order to use OKI LPR Utility, TCP/IP must be
activated.
Note
 The OKI LPR utility cannot be used for shared printers.
 Please use the standard TCP/IP port.
 Even when connected using a wireless LAN, the displayed
MAC address becomes the MAC address of the wired LAN.
Launching the Utility
1 Click on [Start], and select [All
Programs]>[Okidata]>[OKI LPR
Utility]>[OKI LPR Utility].
Adding a Printer
You can add a printer to the OKI LPR utility.
Note
 This requires administrator rights.
 If you cannot add a printer in Windows 8/Windows Server
2012/Windows 7/Windows Vista/Windows Server 2008
R2/Windows Server 2008, shut down OKI LPR utility first
and right-click on [Start] > [All Programs] > [Okidata]
> [OKI LPR Utility] > [OKI LPR Utility], and select
[Run as administrator] to launch.
Memo
 You cannot add the printer which already registered at OKI
LPR utility. If you want to change the port, select [Confirm
Connections] in [Remote Print] menu.
1 Launch the OKI LPR utility.
2 Select [Add Printer] from the [Remote
Print] menu.
3 Select [Printer Name] and enter the IP
address.
Network printers and printers connected to the
LPR port are not displayed.
4 When selecting a network printer, select
[Discover].
5 Click on [OK].