Oki MPS4200mb - Initializing Flash Memory; Resetting the Machine Settings

Initializing
- 174 -
5 Press to select [Management] and
then press .
6 Press to select [SD Memory Card
Setup] and then press .
7 Press to select [Format Partition]
and then press .
8 Press to select the partition you want
to initialize and then press .
A message appears confirming you that
continuing will automatically restart the system.
Select [Yes] to continue.
Initializing Flash Memory
Flash memory has saved mail templates, etc.,
stored on it.
Use the following steps to initialize.
Note
 When you initialize flash memory, the following data is
deleted:
- Custom demo data
- Font data
1 Press the <SETTING> key
2 Press to select [Admin Setup] and
then press .
3 Enter the administrator password.
4 Select [Enter], and then press .
5 Press to select [Management] and
then press .
6 Press to select [Flash Memory
Setup] and then press .
7 Check that [Initialize] is selected and
then press .
8 Check that [Execute] is selected and
then press .
A message appears confirming you that
continuing will automatically restart the system.
Select [Yes] to continue.
Resetting the Machine
Settings
You can return the configured settings to their
default.
Note
 When you initialize the equipment settings, the following
data is deleted:
- Stored documents on the Fcode bulletin board
- Fax jobs that have not been sent
- Fax jobs received in the Fcode parent box.
-Registered job macros
- Dialing logs
- E-mail logs
1 Press the <SETTING> key.
2 Press to select [Admin Setup] and
then press .
3 Enter the administrator password.
4 Select [Enter], and then press .
5 Press to select [Management] and
then press .
6 Press to select [Reset Settings] and
then press .
7 Check that [Execute] is selected and
then press .
A message appears confirming you that
continuing will automatically restart the system.
Select [Yes]to continue.
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK