List of the Device Setting Menu Items
-96-
Network Menu
To enable the settings changed in the [Network Control] menu, the network card must be restarted. Follow the instructions on
the confirmation screen displayed when changing the settings, and restart the network card.
Item
Factory
Default
Description
Network
Setting
TCP/IP Enable Sets whether to enable TCP/IP.
IP Version IPv4 Selects the IP version.
IPv6 can be selected only by Telnet.
When IPv6 is selected by Telnet, the
screen before selecting items, [IPv6] is
displayed, and on the screen after select-
ing items, nothing is selected.
Display condition:TCP/IP protocol is
enabled.
NetBEUI Disable Sets whether to enable NetBEUI.
NetBIOS over TCP Enable Sets whether to enable NetBIOS over
TCP.
Display condition: TCP/IP protocol is
enabled and the IP version is not set to
IPv6.
NetWare Disable Sets whether to enable NetWare.
EtherTalk (MB451/MB451w/MB471/MB471w/
MB491/MB491+/MB491+LP/ES4191 MFP/
MPS4200mb/MPS4700mb Only)
Disable Sets whether to enable EtherTalk.
Frame Type Auto Selects a frame type.
Display condition:Netware is enabled.
IP Address Set Auto Sets the method of setting up IP address.
Display condition: TCP/IP protocol is
enabled and the IP version is not set to
IPv6.
IPv4 Address 192.168.
100.100
Sets an IP address.
Display condition: TCP/IP protocol is
enabled and the IP version is not set to
IPv6.
Subnet Mask 255.255.
255.0.
Sets a subnet mask.
Display condition: TCP/IP protocol is
enabled and the IP version is not set to
IPv6.
Gateway Address 0.0.0.0 Sets a gateway address.
Display condition: TCP/IP protocol is
enabled and the IP version is not set to
IPv6.
DNS Server (Primary) 0.0.0.0 Sets an IP address for primary DNS
server. Display condition: TCP/IP protocol
is enabled and the IP version is not set to
IPv6.
DNS Server (Secondary) 0.0.0.0 Sets an IP address for secondary DNS
server. Display condition: TCP/IP protocol
is enabled and the IP version is not set to
IPv6.
WINS Server (Primary) 0.0.0.0 Sets a name or an IP address for the
WINS server.
Display condition: TCP/IP protocol is
enabled and the IP version is not set to
IPv6.
To Next Page
Loading...
