Oki MPS5501B User Manual

- 44 -
Setting the Time that Elapses Before Entering the Power Save Mode
2
Printing Basic Operation
●● Setting the Time that Elapses Before Entering the
Power Save Mode
Note
● When the printer is in power saving mode, press the <POWER SAVE> button to restore from the mode.
● Make sure that the message “Ready To Print” is displayed in the operator panel. If the message is not displayed, press the
<ON LINE> button.
1 Press the <Fn> key on the operator
panel.
2 Enter “200” using the ten-key pad, then
press the <ENTER> button.
䣈䣷䣰䣥䣶䣫䣱䣰䢢䣐䣷䣯䣤䣧䣴
䢴䢲䢲
䣇䣰䣶䣧䣴䢢䢳䢯䢵䣦䣫䣩䣫䣶䢢䣐䣷䣯䣤䣧䣴
3 Press the scroll button or to specify
the time and then press the <ENTER>
button.
䣒䣱䣹䣧䣴䢢䣕䣣䣸䣧䢢䣖䣫䣯䣧 䢰䢰䢰䢢 䢳䢱䢵
䢬䢢䢳䢢䣯䣫䣰䣷䣶䣧
䢴䢢䣯䣫䣰䣷䣶䣧䣵
䢶䢢䣯䣫䣰䣷䣶䣧䣵
䢵䢢䣯䣫䣰䣷䣶䣧䣵
4 Press the <ON LINE> button.
Memo
● The power save time can be selected from among the
options shown below.
The factory default setting is 1 minute.
- [1 minute]
- [2 minutes]
- [3 minutes]
- [4 minutes]
- [5 minutes]
- [10 minutes]
- [15 minutes]
- [30 minutes]
- [60 minutes]

Oki MPS5501B Specifications

General

Print Speed	55 ppm
Resolution	1200 x 1200 dpi
Standard Paper Capacity	630 sheets
Connectivity	USB 2.0, Ethernet
Max Paper Size	A4
Maximum Paper Capacity	3160 sheets