What to do if my Oki Teriostar LP-1040 Printer paper jams frequently?
If your Oki Printer experiences frequent paper jams, consider these potential causes and solutions: * Ensure that the paper type setting matches the paper you are using. It is recommended to use OKI Data Infotech-specified paper. * Make sure the paper is set correctly in the printer. * Check for and remove any obstructions in the paper path.
What to do if my Oki Printer does not print?
If your Oki Printer is not printing, ensure the interface cable is correctly connected. Also, check for any error messages and take the action specified.
What to do if the 'Paper Jam' error appears on my Oki Printer?
If your Oki Printer displays a 'Paper Jam' error, remove the jammed paper by following the procedures described in the manual.
What to do if my Oki Printer has an IP address already in use?
If your Oki Printer's IP address is already in use, use the correct IP address to resolve the conflict.
Why is my Oki Teriostar LP-1040 Printer printing too dark or light?
If your Oki Printer's output is either too dark or too light, try adjusting the print density settings to achieve the desired print quality.
How to fix Oki Teriostar LP-1040 Printer when the power does not turn on?
If your Oki Printer is not turning on, ensure that the printer's socket is correctly connected to the outlet and that the outlet is receiving power.
What to do if my Oki Teriostar LP-1040 is printing partially missing information?
If your Oki Printer is producing printouts with missing parts, consider the following: * Verify that the paper type setting on the touchpanel matches the installed paper type. Replace the paper or change the touchpanel setting accordingly. * If the paper is moist, cut off the top of the roll paper installed in the Printer. * Ensure you are using OKI Data Infotech-specified paper. If not, install the correct paper type.
What to do if my Oki Teriostar LP-1040 Printer does not start or operate normally?
If your Oki Printer is not starting or operating as expected, check the error message and follow the recommended actions.
What does it mean when the 'Door is Open' error appears on my Oki Printer?
If you receive a 'Door is Open' error message on your Oki Printer, simply close the door or drawer indicated in the message.
Why are black lines appearing on my Oki Teriostar LP-1040 Printer printouts?
If black lines are appearing on your Oki Printer's printouts, it may indicate that the service life of the process cartridge is ending. Try replacing the process cartridge.
General| Print speed | 40 ppm |
|---|---|
| Technology | LED |
| Media size | A4 |
| Interface | USB 2.0, Ethernet |
| Supported Operating Systems | Windows |
To Next Page
