OKM Bionic X4 - Control Unit Specifications; Laser Specifications; Data Transfer Specifications

10 Technical specifications
The following technical indications are medial values. During operation small variations are quite
possible. Technical changes due to development are also possible.
2.1 Control Unit
Dimensions (H x W x D) .............................................................................................. 260 x 140 x 220 mm
Weight ................................................................................................................................... approx. 780 g
Display ..................................................................................................................................... LCD display
Voltage ............................................................................................................................................ 12 VDC
Operating time (no smart phone at USB) ......................................................................... approx. 16 hours
Operating time (smart phone at USB) ................................................................................ approx. 8 hours
Operating temperature ........................................................................................................ 0 °C to +70 °C
Feedback .......................................................................................................................... acoustical, visual
Processor ..................................................................................................... Atmel AtMega CPU, 14,7 MHz
2.2 Laser
Laser beam distance ................................................................................................................. max. 150 m
Laser output .............................................................................................................................. max. 3 mW
Emitted wavelength ........................................................................................................................ 650 nm
Laser class ....................................................................................................................... 3R (EN 60 825-1)
Operating temperature ...................................................................................................... 15 °C to +35 °C
2.3 Data Transfer
Technology ...................................................................................................................... Bluetooth, class 1
Frequency ........................................................................................................................ 2.4 – 2.4835 GHz
Maximum Transfer Rate .................................................................................................................. 1 Mbps
Receiving Sensitivity ...................................................................................................................... -85 dBm
Maximum Range ......................................................................................................................... max. 10 m
OKM GmbH
www.okmmetaldetectors.com