Need help?Do you have a question about the OKM ROVER C4 and is the answer not in the manual?
An introductory statement from OKM GmbH thanking the customer for their purchase of the Rover C4.
Crucial safety and operational guidelines for using the Rover C4 and its accessories.
Instructions on how to maintain the measuring instrument and accessories for optimal condition and results.
Warning about potential explosive relics in the ground and safe handling procedures.
Do's and Don'ts for the proper care and usage of the Rover C4 to prevent damage.
Guidelines to maintain the detector's performance and prevent degradation over time.
Detailed technical specifications for the Rover C4 control unit, including dimensions and components.
Technical specifications related to the wireless data transfer capabilities of the device.
Technical specifications for the Standard Probe accessory.
Technical specifications for the Super Sensor accessory.
Detailed explanation of the Rover C4's control unit components and their functions.
Description of the Standard Probe and Super Sensor, including their LED Orbit feature.
Information on connecting and using Bluetooth headphones with the Rover C4.
Step-by-step guide to pairing the OKM detector with a computer via Bluetooth.
Instructions on how to assemble the Rover C4 detector and prepare it for measurement.
Guide to performing a graphical 3D measurement for detailed analysis on a computer.
Details on adjusting essential parameters before conducting a 3D Ground Scan.
Instructions for saving scan data into one of the four memory areas.
Steps for establishing a wireless data connection for real-time transfer to a PC.
Step-by-step guide on how to perform the actual 3D ground scan measurement.
How to use the Pinpointer mode for precise target location and metal differentiation.
Steps to prepare for a Pinpointer scan, including data transfer setup.
Instructions on how to perform the actual measurement in Pinpointer mode.
Guidance on interpreting signatures in Pinpointer mode to identify target characteristics.
Information on using the Magnetometer mode for detecting ferromagnetic metals.
Steps to prepare for a Magnetometer scan, including ground balance.
How to perform the actual measurement using the Magnetometer mode.
Guide to prospecting for mineral deposits and natural gold using the Mineral Scan mode.
Steps for preparing a Mineral Scan, including memory selection.
Instructions on how to perform the actual measurement in Mineral Scan mode.
Guidance on analyzing scan data from Mineral Scan mode using Visualizer 3D Studio.
How to transfer measured data from the Rover C4 internal memory to the PC software.
How to adjust various device settings like volume, language, and lighting.
Adjusting the volume for internal speakers or connected Bluetooth headphones.
Steps to connect Bluetooth headphones to the Rover C4.
How to change the user interface language of the Rover C4.
Toggling the LED lights for illumination during scanning.
Regulating the display and touchscreen brightness for optimal visibility.
Resetting all configurations to factory defaults.
Displaying device serial number and firmware version for support.
Steps to initiate and configure data transfer to the Visualizer 3D Studio software.
General| Detection Depth | Up to 25 meters |
|---|---|
| Max Depth | 25 meters |
| Display | LCD |
| Data Transmission | Bluetooth |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +60°C |
| Waterproof | No |
| Data Storage | Internal memory |
| Frequency | 12.5 kHz |
| Operating Modes | Magnetometer, Pinpointer |
| Power Supply | Rechargeable battery |
| Operating Frequency | 12.5 kHz |
To Next Page
