While the tape is playing, use the
VOL,
FADE,
BAL,
TREB,
BASS
and TONE controls just as you do for the
radio. The display will show TP with a
box
around it
and an arrow to show which side of the tape is playing.
Your tape bias is set automatically. When a metal or
chrome tape is inserted, HI-BIAS appears on the
display.
If
you want
to
insert a tape when the ignition is
off, first press
EJECT
or RCL.
If E and a number appear on the radio display, the tape
won’t play because of an error.
ElO:
The tape is tight and the player can’t turn the
tape hubs. Remove the tape. Hold the tape with the
open end down and try to turn the right hub
counterclockwise with a pencil. Turn the tape over
and repeat.
If
the hubs do not turn easily, your tape
may be damaged and should not be used in the
player. Try a new tape to make sure your player is
working properly.
Ell:
The tape is broken. Try a new tape.
If
any error occurs repeatedly or
if
an error can’t be
corrected, please contact your retailer. If your radio
displays an error number, write
it
down and provide
it
to
your retailer when reporting the problem.
REV
(1):
Press this button to reverse the tape rapidly.
Press it again to return to playing speed. The radio will
play the last-selected station while the tape reverses.
You may select stations during
REV
operation by
using TUNE.
FWD
(2):
Press this button to advance quickly
to
another part of the tape. Press the button again to return
to playing speed. The radio will play the last-selected
station while the tape advances. You may select stations
during FWD operation by using TUNE.
PROG
(3):
Press this button to play the other slae
of the tape.
00
(4):
Press this button to reduce background noise.
Note
that
the
double-D symbol will appear on the display.
Dolby@ Noise Reduction is manufactured under
a
license from Dolby Laboratories Licensing Corporation.
Dolby and the double-D symbol are trademarks
of
Dolby Laboratories Licensing Corporation.
RDM
(5):
Press this button to hear the tracks in random,
rather than sequential, order. RDM will appear
on
the
display when you press this button. Press
RDM
again to
turn
off
random play.
To Next Page
Loading...
