To
Reinstall the Rear Seat Cushion
A
safety belt that isn’t properly routed through
the seat cushion or is twisted won’t provide the
protection needed in
a
crash.
If
the safety belt
hasn’t been routed through the seat cushion at
all,
it won’t be there to work for the next
CAUTION: (Continued)
I
passenger. The person sitting in that position
could be badly injured. After reinstalling the seat
cushion, always check to be sure that the safety
belts are properly routed and are not twisted.
1.
2.
3.
4.
Buckle the center passenger position safety belt, and
then route the safety belts through the proper slots in
the seat cushion. Don’t let the safety belt get twisted.
Slide the rear
of
the cushion up and under the
seatback
so
the rear locating guides hook into the
wire loops on the back frame.
With the seat cushion lowered, push rearward and
then press down on the seat cushion until the spring
locks on both ends engage.
Check to make sure the safety belts are properly
routed and that no portion of any safety belt
is
trapped under the seat. Also. make sure the seat
cushion is secured.
6-61
To Next Page
Loading...
Need help?
General
