If you would like to program your vehicle to Mode
3,
do
the following:
1.
Select YES for DOORS LOCK IN GEAR.
2.
Select YES for DOORS UNLOCK.
3.
Select YES for ALL DOORS IN PARK.
If you would like to program your vehicle to Mode
4,
do
the following:
1.
Select YES for DOORS LOCK IN GEAR.
2.
Select YES for DOORS UNLOCK.
3.
Select NO for ALL DOORS
IN
PARK.
4. Select NO for ALL DOORS AT KEY
OFF.
5.
Select NO for DRIVERS DOOR IN PARK.
6.
Select YES for DRIVERS DOOR KEY
OFF.
If
you would like to program your vehicle to Mode
5,
do
the following:
1.
Select YES for DOORS LOCK IN GEAR.
2. Select YES for DOORS UNLOCK.
3.
Select NO for ALL DOORS IN PARK.
4.
Select YES for ALL DOORS AT KEY
OFF.
See
Programmable Automatic Door Locks
on
page
2-12
for more information about this feature.
Window
Lock
Out
The number of passenger windows locked out by the
window LOCK switch can be programmed through
the DIC.
Press the SELECT right arrow button to toggle between
your choices and change the settings. Press the
SELECT down arrow button to store your changes in
memory and move on to the next selection.
If
you select YES for PASS WINDOW LOCKOUT, all
three passenger window switches will be locked
out when the window LOCK switch
is
on.
If you select NO for
PASS
WINDOW LOCKOUT, only
the two rear passenger window switches will be
locked out when the window LOCK switch is on.
For more information on this feature, see “Window Lock
Out” under
Power Windows
on
page
2-18.
3-55
To Next Page
Loading...
