Security
Feedback
You can program the security feedback feature to
change
to the following modes:
Mode
1:
No feedback when locking or unlocking the
vehicle.
Mode
2:
Parking lamps and the DRL will flash twice
when unlocking the vehicle and flash once when locking
the vehicle.
Mode
3:
Horn chirps when all doors are unlocked
(second unlock button press) and when locking
the vehicle.
Mode
4:
Parking lamps and the DRL will flash twice
each time the button with the unlock symbol is pressed;
the horn chirps when all doors are unlocked. Parking
lamps and the exterior lamps flash once and the
horn chirps when locking the vehicle.
You can change these modes by different selections of
the following DIC displays:
KEY FOB LIGHTS FLASH
-
YES/NO
0
KEY FOB HORN CHIRP
-
YES/NO
Press the SELECT right arrow button
to
toggle between
your choices and change the settings. Press the
SELECT down arrow button to store your changes in
memory and move on to the next selection.
If you would like to program your vehicle to Mode
1,
do
the following:
1.
Select NO for KEY FOB LIGHTS FLASH.
2.
Select NO for KEY FOB HORN CHIRP.
If
you would like to program your vehicle to Mode 2,
do
the following:
1.
Select YES for KEY FOB LIGHTS FLASH.
2. Select NO for KEY FOB HORN CHIRP.
If you would like to program your vehicle to Mode
3,
do
the following:
1.
Select
NO
for KEY FOB LIGHTS FLASH.
2.
Select YES for KEY FOB HORN CHIRP.
If you would like to program your vehicle to Mode
4,
do
the following:
1.
Select YES for KEY FOB LIGHTS FLASH.
2.
Select YES for KEY FOB HORN CHIRP.
For more information on this feature, see “Security
Feedback under
Remote Keyless Entry System
Operation on page
2-6.
3-56
To Next Page
Loading...
