33
I
GB
F
D
E
SK
P
GR
TR
CZ
RUS
UK
PL
ENVIRONMENTAL PROTECTION
Environmental protection should be a priority
of considerable importance when using the
machine, for the benefit of both social cohesion
and the environment in which we live.
- Try not to cause any disturbance to the
surrounding area.
- Scrupulously comply with local regulations
and provisions for the disposal of oils, petrol,
batteries, filters, deteriorated parts or any
elements which have a strong impact on the
environment. This waste must not be disposed
of as normal waste, it must be separated and
taken to specified waste disposal centres
where the material will be recycled.
Demolition and disposal
When the machine reaches the end of its
service life, do not dispose of it into the
environment; instead take it to a waste disposal
centre.
Most materials used in the manufacture of the
machine are recyclable; all metals (steel,
aluminium, brass) can be delivered to a normal
recycling station. For information contact your
local waste recycling service. Waste disposal
must be carried out with respect for the
environment, avoiding soil, air and water
pollution.
In all cases, applicable local legislation must
be complied with.
10. TECHNICAL DATA
GS 180E GS 200E
Power 1800 W 2000 W
Voltage 230V
Frequency 50 Hz
Oil tank capacity 350 cm
3
(0.35 )
Chain lubrification Automatic not adjustable
No.of pinion teeth 6
Weight without bar and chain 4.4 kg
Recommended guide bar and chain combinations GS 180E GS 200E
Chain pitch and gauge 3/8" x.050" SP 3/8" x.050" SP
Guide bar length 14" (35 cm) 16" (41 cm)
Type of guide bar 140 SDEA 041 160 SDEA 041
Type of chain 91PJ052X 91PJ057X
Cutting length 330 mm 395 mm
WARNING!!!
The risk of kickback is greater when using a combination bar/chain wrong! Use only the
combination bar/chain recommended and follow the instructions for sharpening.
To Next Page
Loading...
