Olimpia splendid Caldo Relax - And Cleaning; Overheat Protection; Safety Control

EN - 10
ENGLISH
4 - OVERHEAT PROTECTION
• This heater is protected with overheat protection that switches off the appliance
automatically in case of severe overheating
In this case:
- unplug the appliance;
- wait about 30 minutes for it to cool;
- remove any possible cause of overheating, eg. something covering the heater;
- check for damage to the appliance, the cord and the plug.
• If there is no damage:
- plug the unit back in;
- switch it on as described above.
If the heater still does not turn on, please contact Customer Service for assistance.
5 - SAFETY CONTROL (ANTI-OVERTURNING SWITCH)
• If the appliance falls or overturns, the anti-overturning switch is activated and
automatically turns it off.
• It is necessary to place the appliance in vertical position to resume normal operation.
6 - MAINTENANCE AND CLEANING
Before carrying out any cleaning or mainte-
nance operation on the appliance, switch it o󰀨
by turning the knob (7) to “0”. Disconnect the
plug from the socket and wait for the fan to
stop.
• Use a dry cloth to clean the appliance.
• If the appliance is very dirty, it is possible to use a cloth dampened with warm water
(max 50°C) and a mild detergent to clean its external parts. Dry with a dry cloth.
• Use a vacuum cleaner to remove dust from the air inlet/outlet grids (g. 5).