23.3.2005 Rev. 1.0
General information
1
1. General information
Read the instructions in this manual carefully, as they contain important information on
how to install, use and service the appliance safely, properly, and effectively.
Keep this manual in a safe place so that it can be used as reference by other operators of
the appliance.
This appliance should be installed following the instructions provided by the manufactur-
er and in compliance with all applicable local regulations. This appliance should be con-
nected to the power supply by qualified personnel only.
All personnel in charge of using this appliance should be specifically trained in its opera-
tion.
In the event of failure or malfunction, switch off the appliance. The periodic functional
checks requested in this manual should be carried out according to the instructions. Have
the appliance serviced by a technically qualified person duly authorized by the manufac-
turer that uses genuine spare parts.
Failure to comply with the above may jeopardise the appliance’s safety.
1.1 Symbols used in the manual
This symbol informs about a situation where a safety risk could be imminent. The instruc-
tions provided are mandatory in order to prevent injury.
This symbol informs about the right way to act in order to prevent bad results, damage to
the appliance, or hazardous situations.
This symbol informs about tips and hints that help the user to get the best performance out
of the appliance.
This symbol informs about a function that should be taken into account for self-control
purposes.
1.2 Symbols used on the appliance
This symbol on a part warns the user that there are electrical terminals behind it. There-
fore, the concerned part should only be removed by qualified personnel.
To Next Page
Loading...